Pump Rebuild Parts & Kits

Description The Pentair 39010000 is a #2-014 Impeller Lock O-Ring for a Ultra-Flow Pool Pump. O-Rings are used to create a tight and secure seal between separate parts of the pump to prevent leaking. It is a genuine Pentair product.

Description #2-228 Collar and Rotor Union O-Ring

Description The Pentair 33455-8045 is a 1" Impeller to Lockwasher Gasket. It is compatible with the CSPH/CCSPH Series 20HP Commercial Pump. It is a genuine Pentair product.

Description The Pentair 38917-0203 is a Stainless Steel Impeller Washer For Sta-Rite® CSPH/CCSPH Series 7-1/2, 10 and 15 HP Pump. Sta-Rite Commercial Pumps are essential for maximum efficiency and reliability. It is a genuine Pentair product.

Description Closed face impeller made for the SP1580 series pool/spa pump by Hayward. Rated at 1.5hp, it is used in a SP1580 wet end, and must be installed on a 1.5hp (or greater) thru bolt motor. Shaft seal sold separately

Description The Pentair S23619 is a Cap Screw for Sta-Rite® 7-1/2 HP, 1-Phase, 20 HP, 3-Phase CSPH/CCSPH Commercial Pump; 1/2-13" x 1". Sta-Rite Commercial Pumps are essential for maximum efficiency and reliability. It is a genuine Pentair product.

Description Closed face impeller made for the SP1700 series pool/spa pump by Hayward. Rated at 1.0hp, it is used in a SP1700 wet end, and must be installed on a 1.0hp (or greater) thru bolt motor. Shaft seal sold separately

Description The Pentair C23-58 is a Shaft Sleeve. It is compatible with D and CC/C-Series 3 HP Centrifugal Pumps, with the dimensions 2.75" x 2.5" x .5". It is a genuine Pentair product.

Waterway Executive Pump Parts 56 frame 315-1220 3151220 315-1220B 315-1260 Volute Back only - for Executive Series 56 frame pumps, 2" Discharge, fits 2010 and later Waterway Executive pumps with 6.5" diameter motors, for 2" PVC pipe size. 315-1220 has been renamed 315-1260 and part you will receive is marked 315-1260 please note.

Description The Pentair C20-46 is an Adapter Gasket. It is compatible with the D-Series Self Priming Centrifugal Pool and Spa Pump. It is a genuine Pentair product.

Description This back plate is designed to use with Zodiac Jandy ePump, Stealth, PlusHP, WaterFall, MaxHP series pumps models JEP, SHPF/SHPM, PHPF/PHPM, SWF, MHPM.

Description Pentair 355320Z Complete Band Clamp Assembly For WaterFall™ Specialty Pump, Challenger High Flow and High Pressure Inground Pump

Description Keep your pool clean and inviting, Routine pool maintenance will help you keep your pool looking clean, sparkling, and inviting day after day. Having the right collection of pool maintenance products and accessories at your disposal helps cut pool maintenance chores down to size leaving you more time to enjoy your pool with family and friends. Your builder will help you select the brushes and poles, hand skimmers, leaf rakes and traps, and thermometers to keep your pool sparkling...

Description Super-Pro B-106 Sta-Rite/Premier/Aqua-Flo 5" Small Hole Strainer Basket B-106

Description Trap Strainer Basket 5"

DescriptionStrainer Trap BasketPentair C8-58P Trap Basket For Dyna-Glas/Dyna-Max, Dyna-Wave, Max-E-Glas® II/Dura-Glas® II, Dyna-Pro/Dyna-Pro E, IntelliPro VS 3050, Max-E-Pro Series Pump; 6 Inch

Description Stainless Steel Hex Head Cap Screw 3/8"-16 x .75""

Description Stainless Steel Hex Head Cap Screw 3/8"-16 x .75""

Description Bronze Closed Face Impeller 10HP 60 Hz/ 7.5HP 50 Hz

Description Short Shaft Seal Package 1.25" Pentair U109-433SS Shaft Seal For 3 HP, 5 HP CC/C Series Centrifugal Pump;1-1/4 Inch

Description The Super-Pro G-422-9 is a C/CC/D-series Impeller Gasket. A gasket is a rubber piece used to create a seal between two surfaces. It is a genuine Super-Pro product.

Description The Super-Pro G-424-9 is a C/CC/D-series Seal Sleeve Gasket. A gasket is a rubber piece used to create a seal between two surfaces. It is a genuine Super-Pro product.

Description Pentair PKG 51 Cast Iron Strainer Trap with Basket For C, CC, and D Series Pool and Spa Commercial Pump; 6 Inch

Description Challenger Diffuser O-Ring #2-233

Description Challenger Square O-Ring .285" x .2" x 10.275"

Description CHAMPION/ SMF SEAL PLATE GASKET

Description The Pentair 16830-0211 is a Closed Impeller Replacement. It is compatible for use with CSPH/CCSPH Series Pool and Spa Pump; 60Hz/10HP 50Hz. It is a genuine Pentair product.

Description Speck Pumps 2920343310 Complete Mechanical Shaft Seal For 21-80 BS Pool Pump; 20 mm

Description Slinger 2-1/4in D x 1-7/32in D x 1/8in W

Description O-454-9 is a D-series Shaft O-Ring. An O-ring is a round mechanical gasket used in static or dynamic applications. O-Rings block paths that allow liquid or gas to escape. For pool and spa applications use your O-Ring to secure pool pumps, filters, valves and piping.

Description This Diffuser Gasket is for use with Super, Super II and MaxFlo pumps. It is created with durable materials. Made for easy installation and use, this part will help ensure the best service life possible. Replaces: 305450 , 610377040082 , APCO2021 , HAY-101-2016 , HWDSPX1600R ,90-423-1141, SS1600R, O-141

Description The Pentair C21-2 is a Diffuser Ring. This ring is compatible with D-Series Self Priming Centrifugal Pump and Sta-Rite® ED Series Gas Engine Self Priming Centrifugal Pump. It is a genuine Pentair product.

Description Diffuser with O-Ring for SWF125/SWF185/SHPF 5.0 WaterFall Pumps

Description Pentair 072927SSZ Diffuser Assembly with Stainless Steel Bushing For 1-1/2 HP Sparus™ 160 SP2-8 Aquaculture Pump

Description This diffuser is for use with Hayward Super II pump models after 1990. The diffuser's purpose is to reduce the velocity of the impeller's flow, creating a pressure increase. Made for easy installation and use, this part will help ensure the best service life possible.

DescriptionPentair 355029Z Diffuser For Model CFII-NI-1/2F, CFII-NI-3/4F, CFII-NI-3/4A, CFII-NI-1A, 1/2 HP Full Rated Thru 1 HP Up Rated Challenger High Flow Pump